First violin restoration of 2017 Part 1

Violin Labelled
Gaspar de Salo en Brescia 1586
A good German made violin, that was played professionally near the end of the 19th century and passed down in the family.
Of note is the double purfling and tasteful antiquing. The violin was originally finished with some wear marks, but the main wear patterns happened after the instrument was completed.
This is one of nicest German factory instruments I’ve worked on and well worth the restoration.
A center seam crack hiding underneath the tailpiece. When this crack was reglued and cleated the original saddle had to be trimmed. The rest of the seam is in good shape and although there were very few other problems with the top itself, since this needed to be cleated, removal of the top plate was necessary.
Without removing the rib and doing a plaster cast the rib was gently persuaded back into shape with a bit of moisture. A larger cleat was used to support the area originally damaged by overtightening of the chinrest, and part of the lining was removed and reworked to fit better. This type of repair saves time and money, and is structurally sound. However, a bit of distortion will still remain.
The majority of the interior is quite nicely done, with the exception of the endblock which shows a bit of carelessness in its trimming.
The crack came together flawlessly and small cleats have been glued cross grain to stabilize the area and prevent future harm to the area.20170110_183706.jpg
It went back together easier than it came apart.